본문 바로가기 주메뉴 바로가기

Home > 제품소개 >
  • 건조기 주문제작
    Oven Custom-Made
    ▶ 열풍건조기
    ▶ 고온, 초고온, 울트라고온 건조기
    ▶ 산업용, 드럼건조기
    ▶ 크린건조기
    ▶ 자연식건조기
    제품 상세보기 제품 견적문의
  • 크린벤치(Vertical)
    Vertical Clean Bench
    Vertical Type 크린벤치는 공기 중 미세먼지로부터 민간한 시료를 보호하며, 고효율의 HEPA Filter 사용으로 공기의 흐름을 제어, 실험 시 미세한 먼지가 시료에 영향을 미치지 못하도록 챔버 내부 및 작업 장소의 청정도를 유지해주는 장비입니다.
    제품 상세보기 제품 견적문의
  • 배양기
    Incubator
    배양기는 장시간 사용에 적합한 구조로 설계되었으며, 일정 시간 동안 일정 온도를 최소한의 온도 변화폭으로 유지하는 장비입니다.

    ▶ 주 사용온도 Ambient +5℃ ~ 60℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 80L, 150L, 250L, 252L
    제품 상세보기 제품 견적문의
  • 항온수조
    General Water Bath
    항온수조는 시료가 일정한 온도에 도달할 때까지 중탕 및 가열하는 장비이며, 시료를 일정 시간 일정 온도로 유지하는데 사용되는 장비입니다.

    ▶ 주 사용온도 40℃ ~ 99℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 11L, 22L, 36L
    제품 상세보기 제품 견적문의
  • 탁상용항온항습기
    Constant Temp & Humi Chamber
    탁상용 항온항습기는 한정된 온,습도를 내부에 형성시켜 시료의 내구성 및 신뢰성 실험에 사용되는 장비로 테이블에 올려 놓고 사용하기 좋은 소형 항온항습기입니다.

    ▶ 주 사용온도 : +5℃~98℃ OR -20℃~98℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 31L
    제품 상세보기 제품 견적문의
  • 진공건조기(간접)
    Vacuum Dry Oven
    진공건조기는 일반 열풍건조기로만 시료를 건조할 수 없을 때, 특히 산소와 결합하면 산화반응을 일으키는 시료를 건조할때 쓰이는 제품입니다.

    ▶ 주 사용온도 40℃~200℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 8L, 27L, 64L
    제품 상세보기 제품 견적문의
  • 열풍건조기(소형)
    Air Circulation Dry Oven
    실험 시료의 수분측정 및 건조, 내열실험 및 용매제거, 경화 등에 사용되는 기기로 일정한 온도를 일정시간동안 유지시켜주는 기본 장비입니다.

    ▶ 열풍순환식 건조기
    ▶ 주 사용온도 40℃ ~ 200℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 36L, 80L, 150L
    제품 상세보기 제품 견적문의
  • 열풍건조기(중형)
    Air Circulation Dry Oven
    실험 시료의 수분측정 및 건조, 내열실험 및 용매제거, 경화 등에 사용되는 기기로 일정한 온도를 일정시간동안 유지시켜주는 기본 장비입니다.

    ▶ 열풍순환식 건조기
    ▶ 주 사용온도 40℃ ~ 200℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 252L, 410L
    제품 상세보기 제품 견적문의
  • 저온배양기
    Low Temp Incubator
    저온배양기는 저온에서의 실험 또한 가능할 수 있게 제작된 배양기로 일정 시간 동안 일정 온도를 최소한의 온도 변화폭으로 유지하는 장비입니다.

    ▶ 주 사용온도 -5℃ ~ 60℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 32L, 150L, 250L
    제품 상세보기 제품 견적문의
  • 순환수조
    Circulation Water Bath
    순환수조는 내부의 물을 순환시켜 정밀한 온도 조건을 형성시키는 장비입니다.

    ▶ 주 사용온도 40℃ ~ 99℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 11L, 22L, 36L
    제품 상세보기 제품 견적문의
  • 항온항습기(상온경제형)
    Constant Temp & Humi Chamber
    항온항습기는 한정된 온,습도를 내부에 형성시켜 시료의 내구성 및 신뢰성 실험에 사용되는 장비입니다.
    경제적인 보급형 컨트롤러인 TC2가 사용된 제품입니다.

    ▶ 주 사용온도 : +5℃~98℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 150L, 252L, 384L
    제품 상세보기 제품 견적문의
  • 고온진공건조기(간접)
    High Temp Vacuum Dry Oven
    진공건조기는 일반 열풍건조기로만 시료를 건조할 수 없을 때, 특히 산소와 결합하면 산화반응을 일으키는 시료를 건조할때 쓰이는 제품입니다.

    ▶ 주 사용온도 40℃~300℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 27L, 64L
    제품 상세보기 제품 견적문의
  • Air Circulation Dry Oven_Small Type
    Air Circulation Dry Oven
    This is a fundamental device to maintain the consistent temperature for a certain amount of time as it is used for moisture measurement, drying, removal of solvent in heat resistance test, and hardening for the experiment device.
    -> Air circulating method – Circulate internal temperature by forcefully operating a fan and maintain consistent temperature
    -> Major temperatures: 40℃ - 200℃
    -> Manufactured goods: 80ℓ, 150ℓ
    -> Custom manufacturing available
    제품 상세보기 제품 견적문의
  • 진공건조기(판열)
    Vacuum Dry Oven
    진공건조기는 일반 열풍건조기로만 시료를 건조할 수 없을 때, 특히 산소와 결합하면 산화반응을 일으키는 시료를 건조할때 쓰이는 제품입니다.

    ▶ 주 사용온도 40℃~300℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 27L, 64L
    제품 상세보기 제품 견적문의
  • 냉동항온수조
    Low Temp Water Bath
    냉동항온수조는 상온 및 저온에서도 정밀한 온도 조절이 요구되는 실험에 사용할 수 있는 장비로 폭넓은 사용 온도로 여러 종류의 시료에 대한 실험이 가능합니다.

    ▶ 주 사용온도 -15℃ ~ 99℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 7L, 18L
    제품 상세보기 제품 견적문의
  • 항온항습기R1(-20℃)
    Constant Temp & Humi Chamber
    항온항습기는 한정된 온,습도를 내부에 형성시켜 시료의 내구성 및 신뢰성 실험에 사용되는 장비입니다.
    주 컨트롤러를 NEX1200으로 사용하여 제품운행시 온,습도 그래프 확인 및 데이터 저장기능이 가능합니다.

    ▶ 주 사용온도 -20℃~98℃
    ▶ Digital Microprocess Touch Screen Programming Controller
    ▶ CAPACITY : 150L, 252L, 384L
    제품 상세보기 제품 견적문의
  • 고온건조기
    High Temp Dry Oven
    고온건조기는 200℃ 이상의 고온실험시 사용되는 열풍순환식 건조기 입니다.

    ▶ 열풍순환식 건조기
    ▶ 주 사용온도 40℃ ~ 300℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 90L, 150L, 252L
    제품 상세보기 제품 견적문의
  • 진공건조기(질소퍼징)
    Vacuum Dry Oven(N)
    챔버 내부를 질소로 가득 채워 산소 유입을 최소화하는 장비입니다. 열풍건조기로만 시료를 건조할 수 없을 때 산소와 결합하면 산화반응을 일으키는 시료를 건조할때 쓰이는 제품입니다.

    ▶ MAX 250℃, 350℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 27L, 64L
    제품 상세보기 제품 견적문의
  • Air Circulation Dry Oven_Mid Type
    Air Circulation Dry Oven
    This is a fundamental device to maintain the consistent temperature for a certain amount of time as it is used for moisture measurement, drying, removal of solvent in heat resistance test, and hardening for the experiment device.
    -> Air circulating method – Circulate internal temperature by forcefully operating a fan and maintain consistent temperature
    -> Major temperatures: 40℃ - 200℃
    -> Manufactured goods: 252ℓ, 410ℓ
    -> Custom manufacturing available
    제품 상세보기 제품 견적문의
  • 크린벤치(Biosafety)
    Biosafety Clean Bench
    Biosafety Type 크린벤치는 감염성 병원균 또는 인체에 해로운 작업을 할 때 작업자의 안전성 확보를 목적으로 제작되었으며, 외부로 배출되는 공기 또한 안전성을 위해 HEPA Filter 를 통해 배기 되도록 설계, 제작된 제품입니다.
    제품 상세보기 제품 견적문의
  • 오일수조
    Oil Bath
    오일수조는 일반 항온수조로 상승시킬 수 없는 온도 범위를 물이 아닌 유체를 이용하여 온도 상승 또는 유지해주는 장비입니다.

    ▶ 주 사용온도 5℃ ~ 300℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 12L, 24L
    제품 상세보기 제품 견적문의
  • 항온항습기R2(-40℃)
    Constant Temp & Humi Chamber
    항온항습기는 한정된 온,습도를 내부에 형성시켜 시료의 내구성 및 신뢰성 실험에 사용되는 장비입니다.
    주 컨트롤러를 NEX1200으로 사용하여 제품운행시 온,습도 그래프 확인 및 데이터 저장기능이 가능합니다.

    ▶ 주 사용온도 -40℃~98℃
    ▶ Digital Microprocess Touch Screen Programming Controller
    ▶ CAPACITY : 150L, 252L, 384L
    제품 상세보기 제품 견적문의
  • 초고온건조기
    Super High Temp Dry Oven
    초고온건조기는 300℃ 이상의 고온실험시 사용되는 열풍순환식 건조기 입니다.

    ▶ 열풍순환식 건조기
    ▶ 주 사용온도 40℃ ~ 450℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 90L, 150L, 252L
    제품 상세보기 제품 견적문의
  • 울트라고온건조기
    Ultra High Temp Dry Oven
    울트라건조기는 600℃ 이상의 고온실험시 사용되는 열풍순환식 건조기 입니다.

    ▶ 열풍순환식 건조기
    ▶ 주 사용온도 40℃ ~ 700℃
    ▶ Digital Microprocess P.I.D. Program Controller
    ▶ CAPACITY : 90L, 150L
    제품 상세보기 제품 견적문의
  • Vacuum dry oven (indirect)
    Vacuum dry oven (indirect)
    Vacuum dry oven is a product used when it is not possible to dry samples only with regular air circulation dry oven, especially when oxidizing reaction occurs if combined with oxygen making it not available to use.
    -> Major temperatures: 40℃ to 200℃
    -> Manufactured goods: 8l, 27l, 64l
    제품 상세보기 제품 견적문의
  • Industrial Dry Oven
    Industrial Dry Oven
    This is an industrial dry oven to dry mass amount of materials with a large-sized dry oven mostly used in the field of production.
    -> Major temperatures: 40℃ - 200℃
    -> Manufactured goods: 864l, 1152l, 2250l
    -> Custom manufacturing available with size or temperatures
    제품 상세보기 제품 견적문의
  • 산업용진공건조기(간접)
    Industrial Vacuum Dry Oven
    진공건조기는 일반 열풍건조기로만 시료를 건조할 수 없을 때, 특히 산소와 결합하면 산화반응을 일으키는 시료를 건조할때 쓰이는 제품입니다.

    ▶ 주 사용온도 40℃~200℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 125L, 400L, 600L
    제품 상세보기 제품 견적문의
  • 라텍스 글러브
    Completecare Latex Glove
    XS, S, M, L
    제품 상세보기 제품 견적문의
  • Vacuum Dry Oven (Plate Heating)
    Vacuum Dry Oven (Plate Heating)
    This is the vacuum dry oven to adjust the temperature by heating the plate directly by adding the heater on the plate.
    -> Major temperatures: 40℃ to 200℃
    -> Manufactured goods: 27l, 64l
    -> Available with custom manufacturing including the size and temperature
    제품 상세보기 제품 견적문의
  • High Temp Dry Oven
    High Temp Dry Oven
    General air circulation dry oven might cause deformation of the device or many other problems due to the thermal impact if used for a long time in high temperature of 200℃ or above. Therefore, this is the high temp dry oven to choose if using for a long time in high temperature of 200℃ or above.
    -> Major temperatures: 40℃ to 300℃
    -> Manufactured goods: 90ℓ, 150ℓ, 252ℓ
    -> Select with table unified option
    -> Custom manufacturing for large size
    제품 상세보기 제품 견적문의
  • 산업용진공건조기(판열)
    Industrial Vacuum Dry Oven
    진공건조기는 일반 열풍건조기로만 시료를 건조할 수 없을 때, 특히 산소와 결합하면 산화반응을 일으키는 시료를 건조할때 쓰이는 제품입니다.

    ▶ 주 사용온도 40℃~200℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 125L, 400L, 600L
    제품 상세보기 제품 견적문의
  • 진공펌프
    Vacuum Pump
    헤드 직결식으로 작고 가벼워 이동 및 운전이 간편합니다.
    제품 상세보기 제품 견적문의
  • 멸균기(AC)
    Auto Clave(AC)
    AC Series는 가장 기본적인 형태의 증기 멸균기입니다. 반자동 공정 시스템으로 설정 온도 도달 후 멸균 종료 시 증기 배출까지 Auto System으로 작업이 가능합니다.

    ▶ 주 사용온도 121℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 45L, 60L, 80L, 100L
    제품 상세보기 제품 견적문의
  • 콜드트랩(초자형)
    Cold Trap(with glass)
    COLD TRAP은 진공건조기의 진공건조 중 유해 GAS 및 수분을 VACUUM PUMP 이전 단게에서 동결 응축 시키는 장비입니다.

    ▶ 사용온도 -40℃ OR -70℃
    제품 상세보기 제품 견적문의
  • 산업용건조기
    Industrial Dry Oven
    생산현장에서 주로 사용되는 대형 건조기로 한번에 대량의 재료를 건조시킬 때 사용하기 적합한 열풍건조기 입니다.

    ▶ 열풍순환식 건조기
    ▶ 주 사용온도 40℃ ~ 200℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 864L, 1152L, 2250L
    제품 상세보기 제품 견적문의
  • 니트릴 글러브(블루)
    Hand Safe Nitrile Glove (Blue)
    XS, S, M, L
    제품 상세보기 제품 견적문의
  • 멸균기(AC_L)
    Auto Clave(AC_L)
    AC(L) Series는 기존 AC 모델의 특징에 더 다양한 멸균 대상물 수용을 위해 더욱 넓은 챔버 공간 활용을 실현했습니다. 더 큰 용량과 압력을 제어하기 위해 스크류 잠금 방식에 볼트 잠금 제어 방식을 사용하였습니다.

    ▶ 주 사용온도 121℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 150L, 200L, 300L
    제품 상세보기 제품 견적문의
  • 산업용진공건조기 SET(기본형)
    Industrial Vacuum Dry Oven SET(Basis)
    산업용 진공건조기에 트랩을 내부 장착하여 작업 공간의 효율성을 최대화하였으며, 간접 및 직접 두 가열 방식 모두 제작 가능합니다.

    ▶ 주 사용온도 40℃~200℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 400L, 600L
    제품 상세보기 제품 견적문의
  • Constant temp & humi chamber for desk
    Constant temp & humi chamber for desk
    Constant temp & humi chamber for desk is the small sized constant temp chamber designed for the desk in order to relieve the burden of the size as a device used for the experiment for durability and reliability by forming the limited temperature and humidity inside.
    -> Small constant temp chamber
    -> Major temperature : S-TH31 5℃ ~ 98℃ S-THSC31 -20℃ ~ 98℃
    제품 상세보기 제품 견적문의
  • General water bath
    General water bath
    General water tank is a product to use when maintaining the consistent temperature in water tank, soil leaching or sinking, and occurrence.
    -> Major temperature : 40℃ ~ 99℃
    -> Manufactured goods : 11ℓ , 22ℓ
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • Cold trap (glass type)
    Cold trap (glass type)
    Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
    -> Major temperatures : R1: -40℃ (Less than RT.25℃)
    R2: -70 ℃ (Less than RT.25℃)
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • High Temp Vacuum Dry Oven (Indirect)
    High Temp Vacuum Dry Oven (Indirect)
    High temp vacuum dry oven is to be safely used in a wide range of fields including the physical and chemical experiment, moisture removal, and spray in the use of vacuum status.
    -> Major temperatures: 180℃ to 300℃
    -> Manufactured goods: 8l, 27l, 64l
    -> Available with custom manufacturing including the size and temperature
    제품 상세보기 제품 견적문의
  • Super High Temp Dry Oven
    Super High Temp Dry Oven
    Super High Temp Dry Oven is the super high temp air circulation dry oven to choose if using high temperature of 300℃ or above.
    -> Major temperatures: 40℃ to 450℃
    -> Manufactured goods: 90ℓ, 150ℓ
    -> Custom manufacturing for large size

    제품 상세보기 제품 견적문의
  • 콜드트랩
    Cold Trap
    COLD TRAP은 진공건조기의 진공건조 중 유해 GAS 및 수분을 VACUUM PUMP 이전 단게에서 동결 응축 시키는 장비입니다.

    ▶ 사용온도 -40℃ OR -70℃
    제품 상세보기 제품 견적문의
  • 드럼건조기
    Drum Oven
    산업용 건조기의 일환으로 200L의 드럼이 들어갈 수 있도록 제작된 장비입니다.

    ▶ 열풍순환식 건조기
    ▶ 주 사용온도 40℃ ~ 120℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 1666L, 2744L, 4508L
    제품 상세보기 제품 견적문의
  • 니트릴 글러브(코발트 블루)
    Handycare Nitrile Glove (Cobalt Blue)
    XS, S, M, L
    제품 상세보기 제품 견적문의
  • 멸균기(AD)
    Auto Clave(AD)
    AD Series는 5개의 멸균 사이클을 통해 다양한 멸균 실험에도 간편 조작이 가능한 멸균기입니다. 상하 개방 방식의 Door 장착으로 공간 제약을 제거했으며, Door 잠금장치 시스템 제어를 통해 사용자의 안전 또한 고려했습니다.

    ▶ 주 사용온도 121℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 60L, 80L, 100L
    제품 상세보기 제품 견적문의
  • 산업용진공건조기 SET(와이드형)
    Industrial Vacuum Dry Oven SET(Wide)
    산업용 진공건조기에 트랩을 내부 장착하여 작업 공간의 효율성을 최대화하였으며, 간접 및 직접 두 가열 방식 모두 제작 가능합니다.

    ▶ 주 사용온도 40℃~200℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 400L, 600L
    제품 상세보기 제품 견적문의
  • Constant temp & humi chamber
    Constant temp & humi chamber
    Constant temp & humi chamber is used for the experiment for durability and reliability by forming the limited temperature and humidity inside.
    Economic product as it is an economic, entry level controller (T2)
    -> Major temperature : +5℃ ~ 98℃
    -> Manufactured goods :150ℓ, 252ℓ
    - Available for custom manufacturing based on size and temperature
    제품 상세보기 제품 견적문의
  • Constant temp chamber
    Constant temp chamber
    Constant temp chamber is a device reliable to make it feasible to proceed experiment in low temperature other than the one with high temperature.
    This device is used when humidity is not required, and when experiment is conducted only with temperature.
    -> Major temperature : +5℃ ~ 98℃
    -> Manufactured goods : 150ℓ , 252ℓ
    -> Custom manufacturing from the size or temperature
    제품 상세보기 제품 견적문의
  • Cold trap (without glass)
    Cold trap (without glass)
    Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
    -> Major temperatures R1: -40℃ (Less than RT.25℃)
    R2: -70 ℃ (Less than RT.25℃)
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • High Temp Vacuum Dry Oven (Plate Heating)
    High Temp Vacuum Dry Oven (Plate Heating)
    High temp vacuum dry oven is to be safely used in a wide range of fields including the physical and chemical experiment, moisture removal, and spray in the use of vacuum status.
    -> Major temperatures: 180℃ to 300℃
    -> Manufactured goods: 27l, 64l
    -> Available with custom manufacturing including the size and temperature
    제품 상세보기 제품 견적문의
  • Industrial Dry Drum Oven
    Industrial Dry Drum Oven
    This is the dry oven to dry liquid or powder that cannot be dried after placing them on the shelf as this is a large industrial dry drum oven mostly used in the field of production.
    -> Major temperatures: 40℃ to 100℃
    -> Manufactured goods: 2744ℓ
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • 콜드트랩R1(-40℃)
    Cold Trap(R1)
    COLD TRAP은 진공건조기의 진공건조 중 유해 GAS 및 수분을 VACUUM PUMP 이전 단게에서 동결 응축 시키는 장비입니다.

    ▶ MAX -40℃
    ▶ CAPACITY : 20L, 40L, 60L
    제품 상세보기 제품 견적문의
  • 크린건조기
    Clean Dry Oven
    크린건조기는 건조기 내 순환되는 AIR를 CLEAN AIR로 만들어 청정분위기에서 시료를 건조시키는 열풍순환식 건조기 입니다.

    ▶ 열풍순환식 건조기
    ▶ 주 사용온도 40℃ ~ 200℃
    ▶ Digital Microprocess P.I.D. Controller
    ▶ CAPACITY : 90L, 150L
    제품 상세보기 제품 견적문의
  • 니트릴 글러브(화이트)
    Completecare Nitrile Glove (White)
    XS, S, M, L
    제품 상세보기 제품 견적문의
  • 멸균기(FW)
    Auto Clave(FW)
    FW Series는 멸균 공정의 완전 자동화 시스템을 도입한 멸균기입니다. Auto tuning 기능은 물론 챔버 내부에 물이 부족할 경우 수위 조절 센서에서 현재 물의 양을 감지하여 자동 물 공급이 가능합니다.

    ▶ 주 사용온도 121℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 45L, 60L, 80L, 100L
    제품 상세보기 제품 견적문의
  • Vacuum pump (small type)
    Vacuum pump (small type)
    Convenient to move or operate as it is small and light as a head-connected in oil rotary type
    제품 상세보기 제품 견적문의
  • Clean bench
    Clean bench
    Vertical clean bench (sterilized)
    Clean bench is a device applied to the lab and industrial field requiring sterilized working environment
    -> Vertical type
    -> Manufactured goods : 900ℓ, 1200ℓ, 1500ℓ

    제품 상세보기 제품 견적문의
  • Cooling water bath
    Cooling water bath
    Cooling water bath is a product used for the experiment requiring precise temperature control in the low or room temperature.
    -> Major temperature : -15℃ ~ 99℃
    -> Manufactured goods : 7ℓ , 18ℓ
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • Constant temp & humi chamber R1
    Constant temp & humi chamber R1
    Constant temp & humi chamber is used for the experiment for durability and reliability by forming the limited temperature and humidity inside.
    Constant temp & humi chamber R1 product uses controller as touch screen.
    -> Major temperatures : -20℃ ~ 98℃
    -> Manufactured goods : 150ℓ , 252ℓ
    -> Available with custom manufacturing according to the size or temperature
    제품 상세보기 제품 견적문의
  • Constant temp chamber (R1)
    Constant temp chamber (R1)
    Constant temp chamber is a device reliable to make it feasible to proceed experiment in low temperature other than the one with high temperature.
    This device is used when humidity is not required, and when experiment is conducted only with temperature.
    -> Major temperature : -20℃ ~ 98℃
    -> Manufactured goods : 150ℓ , 252ℓ
    -> Custom manufacturing from the size or temperature
    제품 상세보기 제품 견적문의
  • Incubator
    Incubator
    Incubator is a forced circulating product used for incubating microorganisms or germs to maintain the minimum temperature fluctuation for a certain time period.
    -> Major temperatures : 10℃ ~ 60℃
    -> Manufactured goods : 80ℓ, 150ℓ, 252ℓ
    제품 상세보기 제품 견적문의
  • Cold trap R1
    Cold trap R1
    Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
    -> Major temperatures : -40℃ (Less than RT 25℃)
    -> Manufactured goods : 20ℓ, 40ℓ, 60ℓ
    -> Available for custom manufacturing
    Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
    제품 상세보기 제품 견적문의
  • Natural Oven
    Natural Oven
    In general, dry oven means to adjust temperature inside by running a fan forcefully in air circulation method. However, when drying tiny sized powders, natural oven is used to prevent powders from being spread due to the wind.
    -> Major temperatures: 40℃ to 200℃
    -> Manufactured goods: 80ℓ, 150ℓ, 252ℓ
    제품 상세보기 제품 견적문의
  • 콜드트랩R2(-70℃)
    Cold Trap(R2)
    COLD TRAP은 진공건조기의 진공건조 중 유해 GAS 및 수분을 VACUUM PUMP 이전 단게에서 동결 응축 시키는 장비입니다.

    ▶ MAX -70℃
    ▶ CAPACITY : 20L, 40L, 60L
    제품 상세보기 제품 견적문의
  • 항온기R1(-20℃)
    Constant Temp Chamber
    항온기는 고온 실험 이외에 저온 실험도 가능하게 하는 신뢰성 장비 중 하나로 경제적인 보급형 컨트롤러인 TC2가 사용된 제품입니다.

    ▶ 주 사용온도 -20℃ ~ 98℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 150L, 252L
    제품 상세보기 제품 견적문의
  • 자연식건조기
    Natural Oven
    자연식건조기는 자연대류식 건조기로 바람에 영향으로 시료가 날리는 현상을 최소화 하였으며, 아주 작은 분말들을 건조할때 사용하기 유용합니다.

    ▶ 주 사용온도 40℃ ~ 200℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 80L, 150L, 252L
    제품 상세보기 제품 견적문의
  • Clean bench (Bio hazard)
    Clean bench (Bio hazard)
    Bio hazard safety clean bench is a clean bench manufactured for removing safety risk when hazardous gas or substances contact with operators during the work as well as the sterilized working environment.
    Bio hazard safety clean bench shall be applied for sterilized work of hazardous samples on human bodies or toxic CAS.
    -> Manufactured goods: 900ℓ, 1200ℓ, 1500ℓ
    제품 상세보기 제품 견적문의
  • Oil bath
    Oil bath
    Oil bath is a product increasing or maintaining the temperature range that cannot be increased with general water bath though oil instead of water.
    -> Major temperature : 5℃ ~ 300℃
    -> Manufactured goods : 12ℓ , 24ℓ
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • Constant temp & humi chamber R2
    Constant temp & humi chamber R2
    Constant temp & humi chamber is used for the experiment for durability and reliability by forming the limited temperature and humidity inside.
    Constant temp & humi chamber R1 product uses controller as touch screen.
    -> Major temperatures : -40℃ ~ 98℃
    -> Manufactured goods : 150ℓ , 252ℓ
    -> Available with custom manufacturing according to the size or temperature
    제품 상세보기 제품 견적문의
  • Cold trap R2
    Cold trap R2
    Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
    -> Major temperatures : -70℃ (Less than RT.25℃)
    -> Manufactured goods : 20ℓ, 40ℓ, 60ℓ
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • Clean Dry Oven
    Clean Dry Oven
    This is the device to dry samples in the clean environment by making air circulating in the dry oven as clean air.
    This is the air circulation dry oven mostly used for drying products requiring clean environment including semi-conductor or LCD display.
    -> Major temperatures: 40℃ to 200℃
    -> Manufactured goods: 90ℓ, 150ℓ
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • 주문제작
    DRY OVEN
    주문제작제품의 일부를 나열하였습니다.
    제품 상세보기 제품 견적문의
  • 항온기R2(-40℃)
    Constant Temp Chamber
    항온기는 고온 실험 이외에 저온 실험도 가능하게 하는 신뢰성 장비 중 하나로 경제적인 보급형 컨트롤러인 TC2가 사용된 제품입니다.

    ▶ 주 사용온도 -40℃ ~ 98℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 150L, 252L
    제품 상세보기 제품 견적문의
  • 전기로
    Muffle Furnace
    전기로는 피 실험체에 대한 정량 분석, 유기물질등의 회분 및 수분 측정, 금속 열처리 등의 실험을 위하여 광범위하게 사용되고 있는 장비입니다.

    ▶ 주 사용온도 1000℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 3L, 5L, 14L
    제품 상세보기 제품 견적문의
  • 유지력시험기
    Holding Test Chamber
    본 유지력시험기는 일정한 온도와 적정 하중에서 시료의 점척 시간을 측정하는 Oven type의 장비입니다.

    ▶ 주 사용온도 40℃ ~ 200℃
    ▶ Digital Microprocess P.I.D Controller
    ▶ CAPACITY : 135L, 253L
    제품 상세보기 제품 견적문의
  • Circulation Water Bath
    Circulation Water Bath
    Circulation water bath is a product used for incubating microorganism in the precise temperature condition by circulating water inside.
    -> Temperature : 40℃~99℃
    -> Manufactured goods : 11ℓ, 22ℓ
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • Vacuum pump (Industrial)
    Vacuum pump (Industrial)
    As an oil rotary type, this is the head-connected type and is small and light-weighted for the convenience of movement and operation.
    제품 상세보기 제품 견적문의
  • Industrial Vacuum Dry Oven (Plate Heating)
    Industrial Vacuum Dry Oven (Plate Heating)
    Industrial vacuum dry oven indicates a large sized vacuum dry oven.
    -> Major temperatures: 40℃ to 200℃
    -> Manufactured goods: 125l, 400l, 600l
    -> Available with custom manufacturing
    제품 상세보기 제품 견적문의
  • Industrial Vacuum Dry Oven (Indirect)
    Industrial Vacuum Dry Oven (Indirect)
    Industrial vacuum dry oven indicates a large sized vacuum dry oven.
    -> Major temperatures: 40℃ to 200℃
    -> Manufactured goods: 125l, 400l, 600l
    -> Available with custom manufacturing
    제품 상세보기 제품 견적문의
  • Muffle furnace
    Muffle furnace
    This is the product requiring appropriate usage in the temperature less than 1200℃
    Muffle furnace is a product widely used for quantitative analysis on experimented parts, measurement of organic substances or ash and moisture, glass dissolution, and the metal thermal processing experiment
    -> Major temperature : 1000℃
    -> Manufactured goods : 3ℓ , 5ℓ, 14ℓ
    -> Custom manufacturing for large size
    제품 상세보기 제품 견적문의
  • Constant thermal shock tester
    Constant thermal shock tester
    Constant thermal shock tester is a reliable measuring device to test abnormality on materials or parts by adding rapid thermal changes in low or high temperature on industrial materials or parts.
    제품 상세보기 제품 견적문의
  • Auto clave
    Auto clave
    Auto clave is a product sterilizing the contents by controlling high temperature or pressure by heating water with certain temperature in the closed container.
    -> Manufactured goods : 60ℓ, 100ℓ
    제품 상세보기 제품 견적문의
  • Constant temp chamber (R2)
    Constant temp chamber (R2)
    Constant temp chamber is a device reliable to make it feasible to proceed experiment in low temperature other than the one with high temperature.
    This device is used when humidity is not required, and when experiment is conducted only with temperature.
    -> Major temperature : -40℃ ~ 98℃
    -> Manufactured goods : 150ℓ , 252ℓ
    -> Custom manufacturing from the size or temperature
    제품 상세보기 제품 견적문의
  • Low Temp (B.O.D) incubator
    Low Temp (B.O.D) incubator
    Low temp (B.O.D) incubator is a device used if it is required to incubate B.O.D measurement in the high or low temperature.
    -> Major temperatures : -5℃ ~ 60℃
    -> Manufactured goods : 150ℓ, 250ℓ
    -> Available for custom manufacturing
    제품 상세보기 제품 견적문의
  • 주문제작
    WATER BATH
    수조 주문제작품의 일부를 나열하였습니다.
    제품 상세보기 제품 견적문의
  • 주문제작
    CONSTANT TEMP CHAMBER
    주문제작품 중 일부를 나열하였습니다.
    제품 상세보기 제품 견적문의
  • 주문제작
    CONSTANT TEMP & HUMI CHAMBER
    주문제작품의 일부를 나열하였습니다.
    제품 상세보기 제품 견적문의
  • 주문제작
    MUFFLE FURNACE
    1200℃ 이하의 적정 사용을 요하는 제품입니다.

    전기로는 피실험체에 대한 정량분석, 유기물질등의 회분 및 수분측정, 유리용해,금속 열처리 실험을 위하여 광범위하게 사용되고 있는 제품입니다.

    ▶ 주 사용온도 : 1000℃
    ▶ 주문제작 : 64ℓ 주문제작으로 재고는 없습니다.
    ▶ 대형사이즈 주문제작



    제품 상세보기 제품 견적문의
  • 열충격시험기
    Constant Thermal Shock Tester
    열충격시험기는 산업용 소재 및 부품 등에 저온, 고온의 급격한 열변화를 가하여 소재 및 부품의 이상을 실험하는 신뢰성 측정 장비입니다.

    ▶ 온도범위 -40℃ ~ 80℃
    ▶ Digital Microprocess P.I.D Touch Program Controller
    ▶ CAPACITY : 27L, 64L
    제품 상세보기 제품 견적문의
  • 주문제작
    초파리배양기
    제품 상세보기 제품 견적문의

퀵메뉴